FAQs relating to the RS1
Yes! All REELEX machines are capable of adjusting coil parameters. REELEX II simply requires a larger hole size input. To make a REELEX II coil, increase the hole size setting until the REELEX II tube fits easily.
For more information on coil and package types, please see here.
Yes! All REELEX equipment accept signals from most brands of printers. Upon length reset, the printer will send a signal to the REELEX machine to stop (in the case of the D-750) or cut and transfer (in the case of the D-1500 and D-2050). More information can be found in your machine manual.
Yes, however you will likely be unable to achieve maximum performance from your REELEX machine. This is because underpowered payoffs spend more time accelerating or decelerating then running at full speed. To achieve the specified rate of production from your REELEX machine, you must utilize a payoff that is capable of rapidly accelerating and decelerating a supply reel and keep it under control.
If you plan to use a non-REELEX payoff with REELEX coiling machines, the payoff must:
